 |
Fiberglass shelter
Frame made of profile in different existing sizes depending on dimensions and sizes of shelters and kiosks (profile sizes of 9 * 9, 8 * 4, 6 * 3, 4 * 2 centimeters) and in other cases according to the dimensions of the ordered product.
Double walled
The exterior wall from a 2mm thick self colored fiberglass
The interior wall from a 0.7 mm thick galvanized plate
The insulation between two walls from a 4cm thick plastofoam
Rich zinc paint for the liner, epoxy paint for the middle painting (to prevent moisture and corrosion) and alkyd paint for the final painting
White paint for the inside and outside walls
Wires No. 4 & 6 for Built-in wiring in polyethylene pipes with miniature fuse and boxes of 15 & 25 Ampere to prevent any electrical surges and shock
Installing enough switches and plugs for electricity, phone, antenna, and also the earth wire
Ceramic floor
Aluminum doors and windows with electrostatic paint
Plain, colored, single or double glazed windows according to the order.
We will regard these equipments even if there are no orders for them:
Vertical blinds, Fire extinguisher, first aid kit, rack, wall clock, outlet for gas venting wall thimbles and deciding the location
of installing split air conditioner
Isolation with polyurethane glue is used in all parts of shelters and kiosks in order to prevent dust, moisture, corrosion
and also to prevent loss of heating and cooling energy.
 |
Metal shelter
Frame made of profile in different sizes
The exterior wall made of painted galvanized plate
Plastofoam insulation between the interior and exterior wall
Installing wallpaper on inside walls
Single glazed doors and windows made of aluminum with electrostatic painting
Built-in wiring in polyethylene pipes with wires No. 4 & 6 and high capacitance
Installing miniature fuse to prevent electric surge and shock
Installing 10 cm stalks on the floor of shelter to prevent being flooded
Installing enough plugs and switches for electricity, lights, phone antenna and a special plug for the cooler
Ceramic floor
Equipped with antenna outlet and earth wire to prevent electric surge.
Deciding the location of split air conditioner
Ceramic floors for kitchen, kitchenette and sanitary rooms with enough floor drain grates of high solidity against breaking
Isolation in al parts of shelters and kiosks with polyurethane glue to prevent dust, moisture and also to prevent the loss of heating or cooling energy.
 |
Saiding p.v.c shelter
Frame made of profile in different sizes
The exterior wall made of painted galvanized plate
Plastofoam insulation between the interior and exterior wall
Installing wallpaper on inside walls
Single glazed doors and windows made of aluminum with electrostatic painting
Built-in wiring in polyethylene pipes with wires No. 4 & 6 and high capacitance
Installing miniature fuse to prevent electric surge and shock
Installing 10 cm stalks on the floor of shelter to prevent being flooded
Installing enough plugs and switches for electricity, lights, phone antenna and a special plug for the cooler
Ceramic floor
Equipped with antenna outlet and earth wire to prevent electric surge.
Deciding the location of split air conditioner
Ceramic floors for kitchen, kitchenette and sanitary rooms with enough floor drain grates of high solidity against breaking
Isolation in al parts of shelters and kiosks with polyurethane glue to prevent dust, moisture and also to prevent the loss of heating or cooling energy.
 |
Fiber cement shelter
Frame made of profile in different existing sizes depending on dimensions and sizes of shelters and kiosks (profile sizes of 9 * 9, 8 * 4, 6 * 3, 4 * 2 centimeters) and in other cases according to the dimensions of the ordered product.
Double walled
The exterior wall from a 2mm thick self colored fiberglass
The interior wall from a 0.7 mm thick galvanized plate
The insulation between two walls from a 4cm thick plastofoam
Rich zinc paint for the liner, epoxy paint for the middle painting (to prevent moisture and corrosion) and alkyd paint for the final painting
White paint for the inside and outside walls
Wires No. 4 & 6 for Built-in wiring in polyethylene pipes with miniature fuse and boxes of 15 & 25Ampere to prevent any electrical surges and shock
Installing enough switches and plugs for electricity, phone, antenna, and also the earth wire
Ceramic floor
Aluminum doors and windows with electrostatic paint
Plain, colored, single or double glazed windows according to the order
:We will regard these equipments even if there are no orders for them
Vertical blinds, Fire extinguisher, first aid kit, rack, wall clock, outlet for gas venting wall thimbles and deciding the location
of installing split air conditioner
Isolation with polyurethane glue is used in all parts of shelters and kiosks in order to prevent dust, moisture, corrosion
.and also to prevent loss of heating and cooling energy.
 |
Composite shelter
Frame made of profile in different existing sizes depending on dimensions and sizes of shelters and kiosks (profile sizes of 9 * 9, 8 * 4, 6 * 3, 4 * 2 centimeters) and in other cases according to the dimensions of the ordered product.
Double walled
The exterior wall from a 2mm thick self colored fiberglass
The interior wall from a 0.7 mm thick galvanized plate
The insulation between two walls from a 4cm thick plastofoam
Rich zinc paint for the liner, epoxy paint for the middle painting (to prevent moisture and corrosion) and alkyd paint for the final painting
White paint for the inside and outside walls
Wires No. 4 & 6 for Built-in wiring in polyethylene pipes with miniature fuse and boxes of 15 & 25Ampere to prevent any electrical surges and shock
Installing enough switches and plugs for electricity, phone, antenna, and also the earth wire
Ceramic floor
Aluminum doors and windows with electrostatic paint
Plain, colored, single or double glazed windows according to the order
:We will regard these equipments even if there are no orders for them
Vertical blinds, Fire extinguisher, first aid kit, rack, wall clock, outlet for gas venting wall thimbles and deciding the location
of installing split air conditioner
Isolation with polyurethane glue is used in all parts of shelters and kiosks in order to prevent dust, moisture, corrosion
.and also to prevent loss of heating and cooling energy.
 |
portable shelter
Frame made of profile in different existing sizes depending on dimensions and sizes of shelters and kiosks (profile sizes of 9 * 9, 8 * 4, 6 * 3, 4 * 2 centimeters) and in other cases according to the dimensions of the ordered product
Double walled
The exterior wall from a 2mm thick self colored fiberglass
The interior wall from a 0.7 mm thick galvanized plate
The insulation between two walls from a 4cm thick plastofoam
Rich zinc paint for the liner, epoxy paint for the middle painting (to prevent moisture and corrosion) and alkyd paint for the final painting
White paint for the inside and outside walls
Wires No. 4 & 6 for Built-in wiring in polyethylene pipes with miniature fuse and boxes of 15 & 25 Ampere to prevent any electrical surges and shock
Installing enough switches and plugs for electricity, phone, antenna, and also the earth wire
Ceramic floor
Aluminum doors and windows with electrostatic paint
Plain, colored, single or double glazed windows according to the order.
We will regard these equipments even if there are no orders for them:
Vertical blinds, Fire extinguisher, first aid kit, rack, wall clock, outlet for gas venting wall thimbles and deciding the location
of installing split air conditioner
Isolation with polyurethane glue is used in all parts of shelters and kiosks in order to prevent dust, moisture, corrosion
.and also to prevent loss of heating and cooling energy